MEGAJET P160 SERIES
Introductions:
The MEGAJET model P160 series is capable of power input
up to 160 horsepower and flows* approaching twelve
gallons per minute at 40,000 psi. It is the most
advanced and efficient high-horsepower water blast
pump in the industry. Combining the strength and
the durability of a proven power end workhorse with the
unparalleled simplicity, serviceability, and versatility
of the UNx fluid end design, Megajet bare shaft
pumps are the best choice for those building their
own system or replacing a complicated, worn, or
unreliable pump.
COMMENT:
1Bar = 0.1Mpa = 14.5Psi
1L/Min= 0.06m³/H = 0.264Gpm
1Kw = 1.36Hp
* The flow value here refers to the " theoretical " flow rate.
We do not consider the reduced efficiency due to water compressibility and
expansion of pressure components.
* We only show the conventional plunger matching data of the high-pressure pump,
and you can also customize the required plunger parameters to meet your actual use
requirements within the range.
FLUID END FEATURES:
The MEGAJET40,000 psi Fluid End is standard on every MEGAJET
40,000 psi unit or bare shaft pump. It is also available as a conversion
package for popular pump models or as an addition to an existing
MEGAJET P380 pump. Please refer to the catalog pages that follow
for details on available models.
The FLUID END Advantage
Serviceability
Reduced downtime and maintenance
Five-minute packing change
Fifteen-minute pop-out valve cartridge change
No special tools or equipment are required
Plungers clamped, NOT threaded
Simplicity
Fewer parts than other 40,000 psi fluid ends
Valve one-piece cartridges include suction & discharge valves,
seats, springs, and seals
Swing-down manifold for easy access to components
Versatility
Fast in-the-field pressure range conversion with simple bolt-on
MEGAJET Fluid Ends
Convertibility of the FLUID END design allows one unit to do the work that
another manufacturer would require multiple units or several hours of
downtime to perform
Other Features
Water-lubricated, single-piece high-lubricity packing ring
Solid carbide plungers and plunger bushings
Specially designed discharge and top port connections that are superior
to industry standard connections
High volumetric efficiency
All pressure-bearing components are precision machined from high-quality
stainless steel
Pulsation dampener built into manifold
All 40K Fluid Ends include a gauge, adapter, and two rupture disc
holders
Specifications:
The traditional arrangement of using high-pressure water jet to clean the grille plate and skid of the painting room of the automobile painting production line is to plan the main engine room and the cleaning room of the high-pressure cleaning equipment on the first floor of the painting workshop. Civil professionals make drainage pits and waterproof floors, public professionals configure power electrical interfaces, water source interfaces and air source interfaces between equipment hosts, and equipment professionals arrange stainless steel non-power rolling beds and install grille worktables in the cleaning room. The high-pressure cleaning equipment is arranged between the main engine and connected with the high-pressure spray gun, through which the workpiece is cleaned in the cleaning room. This traditional layout of centralized cleaning requires a large number of paint booth grilles and skids to be cleaned to be transported to the cleaning room and then returned to the appropriate station. However, due to the large self-weight of the grille plate of the spray booth, the grille plate attached with paint fog is bonded to the fixed bracket of the grille plate, which is very inconvenient to disassemble; Moreover, the grille plate is installed on the second floor, and the lifting equipment needs to be carried out frequently; The cleaning process takes a long time, in order not to affect the painting production, it is generally necessary to configure two sets of grille plates. This centralized cleaning layout is time-consuming, laborious, and the working efficiency is very low, which can not adapt to the requirements of high-tempo and high-capacity painting production line.
In order to overcome the above shortcomings, on-line high pressure cleaning equipment came into being. The composition of the on-line high-pressure cleaning equipment is basically the same as that of the traditional layout. The main difference is that interfaces are arranged at different positions in the spray room as access points to connect execution units (such as high-pressure spray guns); The high pressure pipes and manual valves from the ultra-high pressure cleaner to the access points of the spray booth are added, as well as the corresponding control system; The work unit used for cleaning operations in the painting room is not limited to the high-pressure spray gun, but also can choose the ultra-high pressure surface cleaner with higher efficiency and less effort.
Trailer Options
• Hydraulic or electric brakes
• LED lighting
• ICC trailer lighting
• Ball or ring coupler
• Aluminum wheels
• High-visibility striping around the frame
• Thousands of high-quality parts and accessories in stock and available for same-day shipping
• 24/7 Support Program
• Comprehensive website with online parts ordering
• High-caliber domestic and international sales teams offer unmatched expertise in products and applications to provide the best solution for any job
• Start-up training on all new equipment
• Fully staffed engineering and R&D departments.
• Innovative Fluid End - up to 40,000 psi (2750 bar) with upgrades available for most popular pumps, including NLB, Butterworth, and Woma
How to choose the right UHP water cleaning machine:
1. Confirm what will the cleaning machine be used for, surface cleaning, tube cleaning, or pipeline cleaning.
2. What pressure is workable for the cleaning work?
3. What flow rate is workable for the cleaning work?
4. Which driving method is better for the cleaning machine? if it is a motor, please confirm the local volt; if it is a diesel engine, please confirm the power.
5. What accessories and how many will be needed? such as guns, nozzles, and hoses.
6. Do you need a trailer or container to load the machine?
7. For safety, please confirm if you need PPE.
8. Which port shall we ship the machine to?
What are different:
• Waterblast equipment up to 40,000 psi (2750 bar)
• Thousands of high-quality parts and accessories in stock and available for same-day shipping
• 24/7 Support Program
• Comprehensive website with online parts ordering
• High-caliber domestic and international sales teams offer unmatched expertise in products and applications to provide the best solution for any job
• Start-up training on all new equipment
• Fully staffed engineering and R&D departments
• Innovative Fluid End - up to 40,000 psi (2750 bar) with upgrades available for most popular pumps.
Q: What's your advantage?
A: Advanced production technology, the full testing types of equipment, lower price, shorter delivery time,
high-quality after-sale guarantee.
Q: What is the delivery time?
A: Usually 7-30 days.
Q: Are you a factory or trading company?
A: We are a leading water blasting and jetting manufacturer. Welcome to our factory anytime!
Q: What are your main products?
A: Pressure Water Jetting Equipment and accessories are our main products.
Q: How to place the order
A: You can inquire and email us.
){kind=link}