Customized High Pressure Water Jet Climbing Robot For Boiler Cleaning
MEGAJET MJ-330C Rust removal robot - wall-climbing
rust removal robot in the rust removal work not only
energy saving and environmental protection, the most
important is to "dry" no rust, to achieve rapid
construction. The wall-climbing robot integrates rust
removal device, walking mechanism, wall attachment
mechanism, spray device, vacuum system and
intelligent control system.
Model |
MJ-330C |
|
Size |
955*520*376mm
|
Weight |
80KG
|
Working Width |
330mm
|
Rated powe |
750W*2
|
Maximum Load |
100Kg
|
Max Running Speed |
0-11M/Min
|
Work Efficiency |
30-50M²/h
|
Maximum Working Flow |
45L/Min
|
Working Voltage |
48V
|
Level Of Protection |
IP55
|
Machine Traction |
Dual Wheel Independent Drive |
Remote control distance (clear of obstacles) |
500m
|
Control Mode |
Remote Control |
System composition
1.MEGAJET rust removal robot for outer tower of wind power
The robot adopts four-wheel drive, differential steering, with small curvature passing ability, can cross obstacles such as welds, large load capacity, strong wind resistance, can drag power cables, high-pressure pipes, detergent boxes, etc., to climb more than 120 meters high wind power tower barrel;
2. Control system
User-friendly interface remote control, easy to operate the robot, and can control the start and stop of ground cleaning and recycling equipment according to needs;
3. Monitoring system
The robot is equipped with a video surveillance system to observe the cleaning effect at close range;
4. Security system
When the robot accidentally falls off or finishes the work and leaves the field, the safety sling mechanism automatically protects the robot from falling and damaging.
Rust removal is a very important link in the maintenance of large-scale storage tanks, and the quality of rust removal directly affects the quality of corrosion protection. At present, the common methods of rust removal in oil storage tank are power tool polishing machine rust removal and rust removal machine sand blasting machine, shot blasting machine rust removal, because of the easy to produce sparks in the construction process, so do not apply to oil storage tank rust removal must adopt explosion-proof, anti-static construction technology.
Rust removal is a very important link in the maintenance work of large oil tank storage tank, and the quality of rust removal directly affects the quality of corrosion protection. Ultra-high pressure water rust removal, the water jet from the nozzle at a certain Angle impact on the steel plate surface, so that the surface of the steel plate high temperature, so in the process of rust removal, the water droplets on the surface of the steel plate quickly evaporated, so as to achieve the use of water rust without returning to the purpose of "dry".
1. MEGAJET wind power outer tower cylinder rust removal robot has large adsorption force and strong wind resistance;
2. can easily cope with the top diameter of the tower cylinder 2.5 meters transverse and longitudinal overarc;
3. the robot body and wheels are not easy to be contaminated, to avoid slipping, but also to avoid polluting the cleaned surface;
4. high pressure cleaning and cleaning agent low pressure foam spray function can be remotely switched.
5.can be adapted to the rolling brush cleaning mechanism, contact scrub and high pressure water cleaning coordination, completely remove pollutants.
• Thousands of high-quality parts and accessories in stock and available for same-day shipping
• 24/7 Support Program
• Comprehensive website with online parts ordering
• High-caliber domestic and international sales teams offer unmatched expertise in products and applications to provide the best solution for any job
• Start-up training on all new equipment
• Fully staffed engineering and R&D departments.
• Innovative Fluid End - up to 40,000 psi (2750 bar) with upgrades available for most popular pumps, including NLB, Butterworth, and Woma
How to choose the right UHP water cleaning machine:
1. Confirm what will the cleaning machine be used for, surface cleaning, tube cleaning, or pipeline cleaning.
2. What pressure is workable for the cleaning work?
3. What flow rate is workable for the cleaning work?
4. Which driving method is better for the cleaning machine? if it is a motor, please confirm the local volt; if it is a diesel engine, please confirm the power.
5. What accessories and how many will be needed? such as guns, nozzles, and hoses.
6. Do you need a trailer or container to load the machine?
7. For safety, please confirm if you need PPE.
8. Which port shall we ship the machine to?
What are different:
• Waterblast equipment up to 40,000 psi (2750 bar)
• Thousands of high-quality parts and accessories in stock and available for same-day shipping
• 24/7 Support Program
• Comprehensive website with online parts ordering
• High-caliber domestic and international sales teams offer unmatched expertise in products and applications to provide the best solution for any job
• Start-up training on all new equipment
• Fully staffed engineering and R&D departments
• Innovative Fluid End - up to 40,000 psi (2750 bar) with upgrades available for most popular pumps.
Q: What's your advantage?
A: Advanced production technology, full testing types of equipment, lower price, shorter delivery time,
high-quality after-sale guarantee.
Q: What is the delivery time?
A: Usually 7-30 days.
Q: Are you a factory or trading company?
A: We are a leading water blasting and jetting manufacturer. Welcome to our factory anytime!
Q: What are your main products?
A: Pressure Water Jetting Equipment and accessories are our main products.
Q: How to place the order
A: You can inquire and email us.