The MEGAJET model P380 series has a power input capacity of up to 380 hp and a flow rate * close to 1240,000 psi per gallon. This is the most advanced and efficient high-horsepower water-jet industrial pump. Combining strength with the unrivalled durability of the power-end main force, the unrivalled simplicity, applicability and versatility of the fluid-end design, mEGAJET bare shaft pumps are the builders' best choice for their systems or for replacing complex, worn or unreliable pumps. The device can convert the hydraulic end to 2800 bar 45L/min.
1. high pressure cleaning machine characteristics:
High pressure cleaning machine is water as the working medium, usually, the power drive pump through the water to complete a suction, discharge process, the ordinary water into high low flow rate of water, and then transported to the high pressure pipeline, so that it with a certain amount of energy to reach the high pressure nozzle. The aperture of the high pressure nozzle is much smaller than the diameter of the high pressure pipeline, so the water reaching the high pressure nozzle must be accelerated to pass through the nozzle. In this way, the nozzle can convert water at a high and low velocity into a low pressure and high velocity jet. The ejected high-pressure water jet tangentially or positively impacts the surface of the cleaned object, and constantly shocks the cleaned surface, making the dirt fall off. Therefore, the use of a high-pressure cleaning machine is a physical cleaning method.
Because the high pressure water cleaning machine has high efficiency, no pollution and low cost characteristics, so it has been widely promoted and applied in various industries, and has been widely praised. High-pressure cleaning machine cleaning characteristics are: easy to achieve mechanization, automation. High-pressure water cleaning machine can be cleaned in a small space, complex, harsh and harmful environment. Because the working medium of the high pressure cleaning machine is water, so the cost is very low, and energy saving, cleaning efficiency is high.
2.Main uses and scope of use
* Electric power industry: mainly used for air preheater, steam turbine condenser and steam turbine blade cleaning and scaling.
* Iron and steel industry: mainly used to remove the converter fan, flue dust, cleaning continuous casting machine debris.
* Petrochemical industry: mainly used for all kinds of heat exchange equipment, pressure vessel interior and exterior wall cleaning and descaling.
* Oilfield industry: mainly used for crude oil residue of drilling platform, paraffin of storage tank and internal and outer wall cleaning of pumping pipe.
* Oil industry: mainly used for evaporator, heater, pipe and other equipment cleaning.
* Sugar industry: mainly used for evaporator, pipeline, storage tanks and other equipment cleaning.
* Pharmaceutical industry: mainly used for boiler, heat exchanger, pipeline, reactor cleaning and decontamination.
* Construction industry: mainly used for surface chisel hair, cleaning.
* Casting industry: mainly used for casting cleaning, removal of metal oxide skin.
* Water supply industry: mainly used for deep well cleaning and sand fishing.
* Automobile industry: mainly used for automotive coating workshop barrier, skid paint removal.
* Cement industry: mainly used to remove the outer wall of the pipeline and production equipment mud scale layer.
* Municipal industry: mainly used for sewer dredging, building cleaning.
* Aviation industry: mainly used for airstrip oil removal and rubber removal.
* Navigation industry: mainly used for hull, dock paint removal, rust removal, Marine life.
3.Instructions for use of the high-pressure washer
1. Safety precautions and warnings
★ When the pump group is running, the operator shall not be close to its moving parts, let alone dismantle it when the pump group is running.
★ The high-pressure pipeline actuator shall be kept away from the operator to avoid personal injury.
★ Regularly check the sealing of the inlet water and drainage pipe, such as air in the pipeline, to avoid equipment vibration.
★ When the oil surface in the tank is too low, the system water supply is insufficient and there is abnormal sound inside the pump group, it should stop in time to check and remove the fault
At the end of use:
★ pump group should gradually reduce the working pressure before stopping and run the empty load for 5-10 minutes before stopping.
★ When the ambient temperature is lower than 0ºC, if the pump leader is stopped, the residual water in the pump set and the pipeline must be drained to prevent freezing and components of the pump group.
★ Do not allow cleaning the parts of the pump unit with corrosive detergent.
★ In case of a major failure, the equipment operation should be stopped immediately.
Audited Supplier 
){kind=link}
){kind=link}