SAPPHIRE NOZZLES
Introductions:
SAPPHIRE NOZZLES
For High-Pressure Applications
These nozzles are used for high-pressure jetting applications where water filtration
of 10 microns or better is required. Inlaid gemstones in the hole, Jeweled orifices make the best quality, longest-lasting jets possible, especially for ultra-high pressures.
• Pressure Range: 20-40k psi (1400-2800 bar)
• Flow Range: 0.2-4.8 gpm (0.75-18 l/min)
COMMENT:
1Bar = 0.1Mpa = 14.5Psi
1L/Min= 0.06m³/H = 0.264Gpm
1Kw = 1.36Hp
* The flow value here refers to the " theoretical " flow rate.
We do not consider the reduced efficiency due to water compressibility and
expansion of pressure components.
* We only show the conventional plunger matching data of the high-pressure pump,
and you can also customize the required plunger parameters to meet your actual use
requirements within the range.
FLUID END FEATURES:
The MEGAJET40,000 psi Fluid End is standard on every MEGAJET
40,000 psi unit or bare shaft pump. It is also available as a conversion
package for popular pump models or as an addition to an existing
MEGAJET P380 pump. Please refer to the catalog pages that follow
for details on available models.
The FLUID END Advantage
Serviceability
Reduced downtime and maintenance
Five-minute packing change
Fifteen-minute pop-out valve cartridge change
No special tools or equipment are required
Plungers clamped, NOT threaded
Simplicity
There are fewer parts than other 40,000 psi fluid ends
Valve one-piece cartridges include suction & discharge valves,
seats, springs, and seals
Swing-down manifold for easy access to components
Versatility
Fast in-the-field pressure range conversion with simple bolt-on
MEGAJET Fluid Ends
Convertibility of the FLUID END design allows one unit to do the work that
another manufacturer would require multiple units or several hours of
downtime to perform
Other Features
Water-lubricated, single-piece high-lubricity packing ring
Solid carbide plungers and plunger bushings
Specially designed discharge and top port connections that are superior
to industry standard connections
High volumetric efficiency
All pressure-bearing components are precision machined from high-quality
stainless steel
Pulsation dampener built into manifold
All 40K Fluid Ends include a gauge, adapter, and two rupture disc
holders
Specifications:
Versatility
• Fast, in-the-field pressure range conversion with simple
bolt-on MEGAJET Fluid Ends
• Convertibility of the Fluid design allows one unit to do the work that another manufacturer would require multiple units or several hours of downtime to perform
• Thousands of high-quality parts and accessories in stock and available for same-day shipping
• 24/7 Support Program
• Comprehensive website with online parts ordering
• High-caliber domestic and international sales teams offer unmatched expertise in products and applications to provide the best solution for any job
• Start-up training on all new equipment
• Fully staffed engineering and R&D departments.
• Innovative Fluid End - up to 40,000 psi (2750 bar) with upgrades available for most popular pumps, including NLB, Butterworth, and Woma
How to choose the right UHP water cleaning machine:
1. Confirm what will the cleaning machine be used for, surface cleaning, tube cleaning, or pipeline cleaning.
2. What pressure is workable for the cleaning work?
3. What flow rate is workable for the cleaning work?
4. Which driving method is better for the cleaning machine? if it is a motor, please confirm the local volt; if it is a diesel engine, please confirm the power.
5. What accessories and how many will be needed? such as guns, nozzles, and hoses.
6. Do you need a trailer or container to load the machine?
7. For safety, please confirm if you need PPE.
8. Which port shall we ship the machine to?
What are different:
• Waterblast equipment up to 40,000 psi (2750 bar)
• Thousands of high-quality parts and accessories in stock and available for same-day shipping
• 24/7 Support Program
• Comprehensive website with online parts ordering
• High-caliber domestic and international sales teams offer unmatched expertise in products and applications to provide the best solution for any job
• Start-up training on all new equipment
• Fully staffed engineering and R&D departments
• Innovative Fluid End - up to 40,000 psi (2750 bar) with upgrades available for most popular pumps.
Q: What's your advantage?
A: Advanced production technology, full testing types of equipment, lower price, shorter delivery time,
high-quality after-sale guarantee.
Q: What is the delivery time?
A: Usually 7-30 days.
Q: Are you a factory or trading company?
A: We are a leading water blasting and jetting manufacturer. Welcome to our factory anytime!
Q: What are your main products?
A: Pressure Water Jetting Equipment and accessories are our main products.
Q: How to place the order
A: You can inquire and email us.
){kind=link}