Descriptions:
This pump consists of 2 main parts: power end and fluid end;
The normal pressure water is driven by power end to become high pressure water;
The power end is mainly made of gear system;
The fluid end consists of pump head, combined valve, plungers, water seal,
pressure-adjustable valve, gauge, etc.
Lubrication oil model for pump: 75W-40
MEGAJET 6035D
uses customized Weichai high-power
engines to make the equipment run more
stable and efficient,reduce maintenance time,
improve work efficiency,and make your work easier.
Diesel Engine:
Model: WP2.3D48E200
Power: 60Kw
Max. RPM: 1500r/min
Lubrication oil: 15W-40
Triple Plungers HP Pump:
Max. Working Flow Rate: 35L/min
This pump consists of 2 main parts: power end and fluid end;
The normal pressure water is driven by power end to become high pressure water;
The power end is mainly made of gear system;
The fluid end consists of pump head, combined valve, plungers, water seal,
pressure-adjustable valve, gauge, etc.
Lubrication oil model for pump: 75W-40
Accurate Filters:
Stainless steel accurate filters include 3 pcs of filtration cores of 20" and 5mm, which
provide the pump assembly with clean water.
Gauge above filters is installed to observe water pressure(1-3bar is normal); near the
gauge there is a air-draining port, which is used to drain off air in filters when
starting.
Fuel Tank:
The capacity of fuel tank is 60L,
which will guarantee the long work of
the machine.
Oil position sensor is designed there.
Control Panel:
Real-time monitoring for rotary speed of engine, fuel mass, engine water temperature, engine oil pressure, etc.
Emergency stop button, keys and accelerator control button are mounted in this panel.
Starting Battery:
A 12V maintenance-free battery is set in this machine, which includes the main switch in the circuit. The main switch should be turned on while starting and off while stopping.
Pressure-adjustable Valve:
This valve is sued to adjust working pressure of the machine, ranging from 0 to 600bar. 6-angle bolts and nuts on the valve body will control the actual pressure. Return pipe on the side of this valve is used to release redundant flow rate. This pipe is connected to input port of this machine, also can be drained via a water pipe directly.
This valve also can be worked as a safe valve to protect the system.
Booster Pump:
This pump is used to supply sufficient pressure to the machine via a belt with the motor. Belt model is SPB1070.
Gauge:
The gauge is used to show real-time system pressure.
Operations:
Preparations:
1. Mounted the machine on hard and plat ground.
2. Check the level of cooling liquid and engine oil.
3. Check oil position of plunger pump; the right position should be between middle
and bottom level. If it cannot be seen, please re-fuel gear oil 85W-90.
4. Inspect filter cores.
5. Inspect and ensure all bolts and nuts are in tighten conditions.
6. Connect water-supplying soft tube and ensure draining valve is closed.
7. Open water-supplying valve and drain off air in filters. Make sure that all valves in
water input circuit are opened.
8. Install high pressure soft hose to the machine and use lockers between hose and
Audited Supplier 
){kind=link}
){kind=link}