Wholesale High Pressure Washer For Pipeline Cleaning
Equipment Introduction
Megajet high pressure cleaning machine is water as the working medium, usually, the power drive pump through the water to complete a suction, discharge process, the ordinary water into high low flow rate of water, and then transported to the high pressure pipeline, so that it with a certain amount of energy to reach the high pressure nozzle. The aperture of the high pressure nozzle is much smaller than the diameter of the high pressure pipeline, so the water reaching the high pressure nozzle must be accelerated to pass through the nozzle. In this way, the nozzle can convert water at a high and low velocity into a low pressure and high velocity jet. The ejected high-pressure water jet tangentially or positively impacts the surface of the cleaned object, and constantly shocks the cleaned surface, making the dirt fall off. Therefore, the use of a high-pressure cleaning machine is a physical cleaning method.
Because the high pressure water cleaning machine has high efficiency, no pollution and low cost characteristics, so it has been widely promoted and applied in various industries, and has been widely praised. High-pressure cleaning machine cleaning characteristics are: easy to achieve mechanization, automation. High-pressure water cleaning machine can be cleaned in a small space, complex, harsh and harmful environment. Because the working medium of the high pressure cleaning machine is water, so the cost is very low, and energy saving, cleaning efficiency is high.
Equipment parameters
Equipment Details
Three-plunger high pressure pump
Three-piston high pressure pump uses motor force to pressure water to form high pressure water output. The high pressure pump is divided into two parts, force end and hydraulic end.
The force end contains the components of the drive pump. It is also known as "crank end" because it contains a crboom. The hydraulic end contains the components to determine the output pressure of the high pressure pump, mainly including the pump head, set valve, packing function, plunger, water seal, pressure regulating valve, pressure gauge, etc. Model of lubricating oil in pump: heavy load gear oil 85W-90.
Precision filter
breaking rust steel precision filter has a 20-inch 5 micron high-precision filter bag, to provide clean water quality for the pump group. There is a pressure gauge above the filter to observe the water supply pressure of the equipment (the water pressure should be between 2bar and 5bar), and there is an air discharge outlet that allows the operator to vent the air through the filter at the opening time.
Electric control box
Electric control box internal electrical products using the original Chint brand, to ensure the reliability of electrical control is unsafe. The electric control box is equipped with work indicator, fault indicator, emergency stop button, start and stop button, etc.
Booster pump
The booster pump is a multistage vertical centrifugal pump, which can provide sufficient water pressure for the equipment.
High pressure pressure gauge
The pressure gauge is used to display the high pressure water pressure of the system in real time.
High-pressure pressure pressure sensor
The pressure sensor is used to monitor the system pressure and is displayed on the operation panel in real time (optional).
Cooling water valve
If the cooling water valve is used to control the cooling water flow of the plunger and the oil cooler, the size of the cooling water quantity can be controlled by adjusting the opening size of the valve.
Main uses and scope of use
★ Electric power industry: mainly used for air preheater, steam turbine condenser and steam turbine blade cleaning and scaling.
★ Iron and steel industry: mainly used to remove the converter fan, flue dust, cleaning continuous casting machine debris.
★ Petrochemical industry: mainly used for all kinds of heat exchange equipment, pressure vessel interior and exterior wall cleaning and descaling.
★ Oilfield industry: mainly used for crude oil residue of drilling platform, paraffin of storage tank and internal and outer wall cleaning of pumping pipe.
★ Oil industry: mainly used for evaporator, heater, pipe and other equipment cleaning.
★ Sugar industry: mainly used for evaporator, pipeline, storage tanks and other equipment cleaning.
★ Pharmaceutical industry: mainly used for boiler, heat exchanger, pipeline, reactor cleaning and decontamination.
★ Construction industry: mainly used for surface chisel hair, cleaning.
★ Casting industry: mainly used for casting cleaning, removal of metal oxide skin.
★ Water supply industry: mainly used for deep well cleaning and sand fishing.
★ Automobile industry: mainly used for automotive coating workshop barrier, skid paint removal.
★ Cement industry: mainly used to remove the outer wall of the pipeline and production equipment mud scale layer.
★ Municipal industry: mainly used for sewer dredging, building cleaning.
★ Aviation industry: mainly used for airstrip oil removal and rubber removal.
★ Navigation industry: mainly used for hull, dock paint removal, rust removal, Marine life.
.